Roll Forming Machine (Sinusoidal)
The production line of Sinusoidal forming Machine is, 170 cm * 800 cm meters with a 100 mm gear chain which is portable with trailer.
- The Machine has 11 rolling ways; the transformer shaft diameter is 180 mm, the forming machine power is 75 kva.
- The Machine has dynamo, Gear Box, the transformer shaft diameter is 75 mm which has a 7.5 horsepower engine power and 50 rpm machine speed.
- The Machines depth is 19 mm and the step is 76 mm with a bearing capacity of 50 kg per square meter.
- The machine has 260 molds, which is designed as a triangle on the forming machine.
- For shutter doors, the rolled sheets are produced in 1000 mm and 1250mm width.
Trapezoid Roll Forming Machine
The machine dimensions: 10 meters long and 170 centimeters wide, with a 100 mm diameter Gear Chain, this could be easily portable with a trailer.
- Trapezoid Roll Forming Machine has 17 rolling ways plus a 75 kva transformer and a main shaft
- Trapezoid Roll Forming Machine has two dynamos, a gearbox and a 75kva shaft, 7.5 horsepower machine power and 50 rpm machine speed.
- Trapezoid Roll Forming Machine : 75mm length , 35 mm Depth, 60 degree angle, 900 mm width
- Trapezoid Roll Forming Machine : 75mm length, 28 mm depth, 60 degree angle, 1000 mm width
- For roller shutters, 1000 mm and 1250 mm width
Shadow Line Forming Machine
- Shadow Line Forming Machine has 11 rolling ways, with a main shaft transformer and
- Shadow Line Forming Machine has 7.5hp engine power, 50 rpm engine speed
- Shadow Line Forming Machine has a gearbox dynamo of 75mm shaft
- It has two twin gears with a floor of 170 mm and a depth of 30 mm Plus a 100 mm chain saw
Steel deck forming machine
- It has 26 gates with a main shaft
- A 90 kva transformer which has 2 dynamo gearboxes with 1200 mm gear chain. There are 4 special gates for treading on the sides of the sheet into beans shape (or any customized designed) and 2 other gates (on the back of the sheet) and twenty other gates for sheet forming, of which the last four gates are used as sheet iron.
- The length of the device is 15 meters and the width of the device is 170 centimeters.
- The step (depth) of the steel deck device is 75 cm, which manufactured a 94 cm sheet, and if it is designed with the 65 step , it produces a 99 cm sheet.
- In addition, this device is approved by the municipality monitoring system and is made of roll sheet with a thickness of 80% and up to a 1.25 mm thickness the size of the sheets depends on the supervising engineers.
Fine sinusoidal forming
- 22 longitudinal gates with a 65 kva transformer shafts, with nearly 950 molds
- Length: 13 meters and width 1 meter 50 centimeters
- Dynamo gearbox 65 kva, 5.5 horsepower engine power ,40 rpm engine speed
- 100mm chain gear from 16% to 40% thickness
- Forming depth 13 step by step
This forming machine is very sensitive and if you want to form a roll sheet one meter wide, with 18 gates, you can design in which the last two edges of the sheet are lowered and only a one meter wide roll sheet can be formed into fine ribs.
